BLOG Details
Matrix Fitness Treadmills Console Troubleshooting Safery Key Issue
Dec 04, 2021
SYMPTOM:
- If the safety key is triggered but the console does not recognize.
SOLUTION:
- Poor connection to the terminals on console control board
- Check the safety key connection wire using AOV meter, If connection wire is not functioning properly.
- The AOV meter will read ∞ ohms. Replace safety key connection wire as needed.
- Wrong safety key connection wire was used.
- Verify correct safety key connection wire has been installed.
- Console board is damage.
- Replace new console board and try again.