Drive Motor Brushes

Description

Condition New

Motor brushes wear over time and replacing them with new brushes can eliminate low power issues so if your motor is a
bit sluggish this can help...  Remember lubricating the belt and deck (or worn out belt and deck) is the number one cause to the aforementioned
symptom, but this is definitely number two Used on the following models:

Installation will require clipping, crimping, and/or soldering pre existing leads to the brushes.  Do not buy if you don't
think you can do this task.

Price is per brush, motors take two brushes, so if you need two you'll have to order 2.

Used on the following models:
 

PaceMaster

Pro Club LT - 120 VAC
Pro Elite
Pro Plus
Pro Plus II
Pro Select


Precor

9.2x - 9.21 (F5)
9.2x - 9.25 (F7)
9.3x - 9.3s
9.4x - 9.45i (3Y)
9.NT
9.x - 9.4 (32)
90xx - 905e
M9.2x - M9.21s (F6)
M9.2x - M9.2s (51)
M9.4x - M9.4SP
M9.x - 9.1 (45)
Precision Electronics - M9.10 (89)
Precision Electronics - M9.20 (90)
Precision Electronics - M9.20s (91)